HambaPayDriver

1. After installation of the application, the driver logs in it using the driver's job number and personal password, which is created in the back office by the Operator and reported to the driver as a fact. 2. After registration, the driver is offered to select a bus to start working on it. The app receives the signals of the Bluetooth beacons installed in the buses and allows the driver to choose only from those buses whose Bluetooth beacon signals it has received (in other words, the driver must be in the immediate vicinity of the bus) The list for selection shows only those buses that have been defined by the Operator for this driver. 3. Driver selects a bus. He/she gets to the interface with the Start Shift button. Once pressed, the driver is able to see on the App screen: a. Data about the bus (route no., on-board number, license plate number). b. Date and time of shift start c. Current cash register (shows the amount of money received for this particular shift through the passenger app) d. The real-time payment situation for trips on this bus: i. Number of trips per day ii. Number of payments for the current shift (period between Shift Open and Shift Close in the driver app) iii. At the moment (shows the number of passengers who started the trip through the passenger's app and resets the data after the passenger presses the End trip button in his app). 4. At the end of the shift, the driver presses End shift in his app. The app then allows you to re-select the bus and start the shift, and also allows you to select the bus and start the shift again.