SIDOOR SUPPORT

The application allows the user to connect to the SIDOOR control units AT12, AT40, ATD400V and ATD4xxW with a smart device via Bluetooth using the SIDOOR LINK. Features: The application provides a very simple commissioning of the SIDOOR control units. When commissioning the doors, the drive is configured on site in just a few steps. The door thus receives the parameters matched to its size and equipment and exactly adapted to the conditions on site. In addition, individual settings can be made for the running behavior of the doors. The data from the control unit is retrieved, modified via the app and then sent back to the control unit. To save special settings externally as a backup, configuration files can be saved and read in again as required. The monitoring function provides the user with a variety of data, such as door operator opening and blocking counters, operating hours display, control unit type and firmware version, warning messages, etc. The error codes of the 7-segment display on the SIDOOR door controller are displayed on the smart device in plain text, with error notes. This allows for easy error analysis. The firmware of the SIDOOR door control can be updated with the application. Notice: To load firmware update files or product information and operating instructions, an Internet connection must be established. Manual: Answers to questions about the setup and use of the app can be found in the manual at the following LINK: https://support.industry.siemens.com/cs/de/de/view/109802679 Compatibility: The application is compatible with SIDOOR AT12 with firmware version >= V1.23,SIDOOR AT40 with firmware version >= V1.49, SIDOOR ATD400V with firmware version >= V1.10 and SIDOOR ATD4xxW with firmware version >= V1.14. The supported Bluetooth LE version is >= 5.0 The version supports devices with Android version >= 11.0